Fibre Laser Cutting in Malaga, Perth
United Metals Laser cuts steel plate and sheet on Japanese-brand 12 kW and 6 kW fibre lasers at our workshop at 7 Irvine Drive, Malaga. We cut carbon steel up to 40mm thick and sheets up to 2500 x 6000mm, for fabricators, engineers, builders and manufacturers across Perth.
Fibre laser cutting capacity
Maximum sheet size is 2500 x 6000mm. Thickness depends on the material:
| Material | Thickness range |
|---|---|
| Mild / carbon steel | 0.4mm to 40mm |
| Stainless steel | 0.4mm to 25mm |
| Aluminium | 0.4mm to 20mm |
| Brass | 0.4mm to 12mm |
We confirm suitability for your material and part when we review your drawing.
Cutting tolerance by thickness
| Material thickness | Standard cutting tolerance | Minimum hole diameter | Kerf width (approx.) | Typical edge quality |
|---|---|---|---|---|
| 0.5mm to 3.0mm | ±0.10mm | 1.0x thickness | 0.10mm to 0.20mm | Smooth, burr-free (nitrogen) |
| 3.0mm to 10.0mm | ±0.15mm | 1.0x thickness | 0.20mm to 0.35mm | Clean, minimal taper |
| 10.0mm to 20.0mm | ±0.20mm | 1.2x thickness | 0.35mm to 0.50mm | Slight striation on thick steel |
| 20.0mm to 30.0mm+ | ±0.30mm | 1.5x thickness | 0.50mm to 0.65mm | Standard thermal cut edge |
Mark any critical dimensions on your drawing and we will confirm them before cutting.
Thick plate and steel plate cutting
Fibre laser suits brackets, base plates, gussets, flanges and other plate parts. Cutting from your DXF means repeat orders come out the same every time. Parts can go straight on to bending and folding, welding and CNC machining in the same workshop, so one supplier takes the job from flat plate to finished part. Need tube or pipe cut as well? See tube laser cutting.
How to get a fibre laser cutting quote
- Send your DXF or DWG files (AutoCAD and SOLIDWORKS files are fine too), with a PDF drawing if you have one.
- Tell us the material, grade, thickness and quantity for each part, plus any bending, welding or machining you need.
- Our engineers review the drawing, confirm the price and lead time, and can suggest changes that make parts easier or cheaper to make.
Typical turnaround is 2 to 3 working days. Email your drawings to quotes@unitedmetalslaser.com.au or call (08) 6162 6260. Open Monday to Friday, 7:00am to 4:00pm.

